Airwolf HD 3D Printer with JRx Hot End Upgrade

Description

Airwolf HD 3D Printer with JRx Hot end.
The printer is in great condition,
Jus did a full maintenance check - oil, belt tension, bed calibration and few print in the pictures above.
The machine comes with:
- Original Manual
- Full Documentation and slicing profiles - (download  link)
- Allen Wrench
- 2 x PET Tape Sheets
- Original Packaging
- 0.5mm nozzle installed + 0.35mm nozzle on the side
- Ready to print out of the box
Note:
-
The bed glass has a crack! I have installed PET tape on both sides. When you have to change the tape remove only one side and install new tape. It's been working for me without any problem for a while.
- This machine required consistent maintenance in order to function well. Not a ideal 3D printer for beginners!
- works with 3mm filament, bolden drive
- The X axis baring holder part has been replace, you can see it in the pictures (the black part) The new part was obtained by Airwolf
If you have any questions feel free to contact me. Can send videos of the machine working!