1 PC 12VDC LED AUTOMATION DELAY TIMER CONTROL RELAY SWITCH MODULE WITH CASE USA

Description

1 PC BRAND NEW 12 VDC TIMER MODULE WITH CASE !!
IF YOU HAVE ANY QUESTIONS PLEASE ASK !!
Package List:
Features:
New upgrades to simplify, meeting the users' needs.
Increase the power supply anti-reverse function.
The use of opto isolated input and output, enhanced anti-jamming capability and consumption.
The last setting parameters can be memorized after power off.
Signal terminal voltage signal can be maintained for a long time.
To ensure stability, industrial grade PCB board.
Notice:
Relay output is passive contact without charge output, and it control the on and off of the line.
Working modes selection: after power on, long press K1 for 2s, later into the selection of modes: P1~4; K2 to enter the mode.
P-1: Mono-stable trigger delay, a signal to trigger relay, time is up, the relay disconnect;
P-2: A signal trigger and countdown begins, T1 seconds after, the relay open T2 seconds, then close;
P-3: Open T1 seconds, disconnect T2 seconds, infinite loop. Users can set the relay time T1 and T2;
P-4: The relay opens when a signal triggers, when the trigger signal disappears, digital countdown begins, and the relay closes when the time is up.
INSTRUCTIONS ;
Working mode selection:After power on,long press K12 seconds later into the select function mode,P1-1~P1-4 for choose.
P1-1 operating modes:a signal to trigger relay, time is up,the relay
disconnect users,You can set relay time T,click K2 the hundred digital
tube starts flashing,then press K3, the hundred digital change;click K2
ten digital tube starts flashing,then press K3,ten digit changes;click K2
bit digital tube starts flashing, then press K3, single-digit change;then
click K2,; digital pipe does not blink,then press the K3, shifting the
decimal point,the decimal point in a bit indicates 0-999 minutes in ten
represents 0 to 99.9 seconds without a decimal point represents 0-999
seconds;good choice,bringing the time setting is completed.Short press
K1,enter function offline-tuning settings,trigger the default delay period
is invalid, press K1, during the delay trigger active(re-timing),click on
the K1, during the delay reset (timer turned off,the relay reset) press
again to repeat the default settings for the first time.
P1-2 operating modes:A signal trigger ,digital countdown begins,X
seconds after,there lay open Y seconds,then close.Users can set the relay
time X,Y;P1-1different time settings similar to the blue lights that set
the relay time,blue light indicates setting relay off time. Short press K1,
enter function offline-tuning the set,the default trigger is invalid during
the delay,pressK1,during the delay trigger active(re-timing),then click
the first repeat default settings.
P1-3 operating modes:Open X seconds,disconnect Y seconds, infinite
loop.Users can set the relay time X,Y;time setting similar to P1-2.Short
press K1,enter function offline-tuning set,The default function is:set up
an electric circuit the relay first open, press the K1,there lay first
close.Press again to repeat the default functionality.
P1-4 operating modes:a signal to trigger the relay
closes
but do not start
when the trigger signal disappears,digital count down begins X
when finished
the relay opens
and upon another trigger
,
The relay closes again
, the signal disappears,
restart
count down; (equivalent to release the button to start timing, commonly
used in power-off delay). Users can set the relay time X; time setting similar to P1-1.
Specifications:
Timing Range(Settable): 0.1~99.9 seconds; 1~999 seconds; 1~999 minutes
Working Voltage: DC 12V
Signal Voltage: DC 4~20V
Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
Static Current: 20mA
Working Current: 50mA
Working Temperature: -40-85°C
PCB Size: 64 * 35 * 18mm / 2.52 * 1.4 * 0.7in (L * W * H)
PCB Weight: 25g / 0.89oz
Case Size: 68 * 40 * 2 2mm / 2.67 * 1.57 * 0.86in (L * W * H)
Product Weight(With Case): 42g / 1.49oz
Package Size: 11.5 * 7 * 2.2cm / 4.53 * 2.75 * 0.86in (L * W * H)
Package List:
E1019
1 PC 12 VDC DELAY TIMER MODULE WITH CASE